OCPP Smart Socket & Two-Wheeler Charging Station Manufacturer | Wanlin · Practical Product and Application Information
Explore products, technical articles, FAQs, and application information related to WANLIN-010 from OCPP Smart Socket & Two-Wheeler Charging Station Manufacturer | Wanlin.
Review relevant products, system options, application guidance, project support, and pre-sales or after-sales services.
Compare the application scenario, functional requirements, installation environment, interfaces, communication method, quantity, and project schedule.
Confirm model numbers, technical parameters, certifications, delivery terms, and compatibility against current product documents and agreed project requirements.
WANLIN-010 OCPP 1.6J smart charging hub: 10 independent 220V/1000W sockets, 10kW total, 4/3/3 phase balancing, LED ring display, per-socket metering. Factory-direct OCPP charging station with CSMS integration.
Interoperability testing confirms WANLIN-002/WANLIN-010 OCPP 1.6J smart sockets connect with mainstream charging management platforms: BootNotification, per-connector StatusNotification, MeterValues streaming, RemoteStart/Stop and OTA firmware all pass joint debugging.
Wanlin announces the global release of its OCPP 1.6J smart socket line: the WANLIN-002 two-socket and WANLIN-010 ten-socket wall-mounted AC charging stations for e-bikes and two-wheelers, with per-socket metering, 4G Cat.1 connectivity and full CSMS interoperability.
WANLIN-002 is the 2-socket wall-mounted model (max 2.2 kW total, ideal for residential bike sheds, one unit per two parking spots). WANLIN-010 is the 10-socket high-density hub (max 10 kW, 4/3/3 phase distribution, LED ring display and voice prompts) for large sheds, campuses and delivery stations. Both run OCPP 1.6J (2.0.1 compatible) over 4G Cat.1 with per···
Seven protection layers: overload, over-current (4.6 A per socket), short-circuit, leakage (30 mA, response ≤0.1 s with upstream RCD), over-temperature, no-load cut-off and battery abnormality detection. WANLIN-010 adds graded protection with a 100 mA station-level RCD plus 30 mA per socket. Auto stop-on-full ends charging when current stays low for 5 min···
Each physical socket is an independent OCPP connector. On WANLIN-002: connectorId 1 = left socket, 2 = right socket. On WANLIN-010: connectorId 1-10 map to sockets 1-10 (1-4 on phase L1, 5-7 on L2, 8-10 on L3). connectorId 0 is the station aggregate. StatusNotification and MeterValues are reported per connector.
WANLIN-002 and WANLIN-010 support OCPP 1.6J (JSON over WebSocket) as the primary protocol and are compatible with OCPP 2.0.1. Supported 1.6J profiles include Core, Firmware Management, Local Authorization List Management, Reservation, Smart Charging (TxProfile, ChargePointMaxProfile) and Remote Trigger.
Scan to add WeChat
Scan to visit on mobile